Home > Column Internals & Packings
Column Internals & Packings
  • Product
  • Reference List
  • Certificate

General Introduction

We agent the ASU packing of Tianjin Univtech Co., Ltd., who was honored as the technical center of national chemical packing tower and internal fitting in 1990, and whose “ High Efficiency Packing Column with New Type Column Internals” have been listed as the key marketing project among China’s “the Eighth Five-Year Plan” and “the Ninth Five-Year Plan” technology achievements.

Product

Type

Conventional

ASU Packing

Its plain edge design has improved the gas-liquid flow at the interface of two adjacent packing tray to decrease local resistance, avoid early flooding and enlarge the

equipment flexibility range.

High

Throughout

Packing

Especially applicable in large scale ASU. Its special edge curve transition structure

has good division effect to reduce the liquid accumulation among packing trays,

increase the packing flooding point and the operation flexibility.

Copper MadeASU

Packing

Especially applicable in the oxygen-rich section of ASU and in precious gas packing.

Compared to aluminium alloy material, it shows higher mass transfer capability and

safety performance.

Product

Features

       -Two kinds of angle: 45 degrees (Y) 
       -Variable shape 
       -Low pressure drop saving energy consumption 
       -Strong plasticity and insignificant retracting effect 
       -Maximum diameter of up to 4800mm

Applicable

Scope

Applied in air separation unit(ASU), separating nitrogen, oxygen, carbon dioxide, and other gases from the air.

Product

Specification

250Y, 350Y, 500Y, 750Y and 1000Y or customized according to customer requirements.



Model

Nominal Specific

Area, m2/m3

Peak height, mm

Peak distance, mm

Inclination Angle of Corrugation, o

Basic

Dimension

Allowable

Tolerance

Basic

Dimension

Allowable

Tolerance

Basic

Dimension

Allowable

Tolerance

250Y

250

12

 ±0.5

20.5

 ±0.6

45

 ±2

350Y

350

9

 ±0.5

14.5

 ±0.5

45

 ±2

500Y

500

6.5

 ±0.5

10.2

 ±0.5

45

 ±2

750Y

750

4.2

 ±0.5

6.8

 ±0.5

45

 ±2

1000Y

1000

3.1

 ±0.5

5.2

 ±0.5

45

 ±2

 

Material of Construction (MOC)

Stainless steel, Aluminium Alloy, Copper

Product Certification

ISO9001:2008; CE

 

 

| Sitemap |

Copyright © Hubei Sanli Fengxiang Technology Co., Ltd. All Rights Reserved
Technical Support:   

Top
Online Services